arch/arm/boot/dts/st/stm32mp133.dtsi

Source file repositories/reference/linux-study-clean/arch/arm/boot/dts/st/stm32mp133.dtsi

File Facts

System
Linux kernel
Corpus path
arch/arm/boot/dts/st/stm32mp133.dtsi
Extension
.dtsi
Size
2829 bytes
Lines
109
Domain
Architecture Layer
Bucket
arch/arm
Inferred role
Architecture Layer: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

CPU and platform-specific kernel glue: boot entry, traps, syscall entry, interrupts, page tables, context switch, and low-level barriers.

Dependency Surface

Detected Declarations

Annotated Snippet

// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
 * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
 */

#include "stm32mp131.dtsi"

/ {
	soc {
		m_can1: can@4400e000 {
			compatible = "bosch,m_can";
			reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
			reg-names = "m_can", "message_ram";
			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "int0", "int1";
			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
			clock-names = "hclk", "cclk";
			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
			status = "disabled";
		};

		m_can2: can@4400f000 {
			compatible = "bosch,m_can";
			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
			reg-names = "m_can", "message_ram";
			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "int0", "int1";
			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
			clock-names = "hclk", "cclk";
			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
			status = "disabled";
		};
	};
};

&etzpc {
	adc_1: adc@48003000 {
		compatible = "st,stm32mp13-adc-core";
		reg = <0x48003000 0x400>;
		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
		clocks = <&rcc ADC1>, <&rcc ADC1_K>;
		clock-names = "bus", "adc";
		interrupt-controller;
		#interrupt-cells = <1>;
		#address-cells = <1>;
		#size-cells = <0>;
		access-controllers = <&etzpc 32>;
		status = "disabled";

		adc1: adc@0 {
			compatible = "st,stm32mp13-adc";
			#io-channel-cells = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0>;
			interrupt-parent = <&adc_1>;
			interrupts = <0>;
			dmas = <&dmamux1 9 0x400 0x80000001>;
			dma-names = "rx";
			nvmem-cells = <&vrefint>;
			nvmem-cell-names = "vrefint";
			status = "disabled";

			channel@18 {
				reg = <18>;
				label = "vrefint";
			};

Annotation

Implementation Notes