arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi

Source file repositories/reference/linux-study-clean/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi

File Facts

System
Linux kernel
Corpus path
arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-rpi-display-2.dtsi
Extension
.dtsi
Size
1730 bytes
Lines
91
Domain
Architecture Layer
Bucket
arch/arm64
Inferred role
Architecture Layer: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

CPU and platform-specific kernel glue: boot entry, traps, syscall entry, interrupts, page tables, context switch, and low-level barriers.

Dependency Surface

Detected Declarations

Annotated Snippet

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
 * Device Tree Overlay for the RPi Display 2 MIPI DSI panel connected
 * to J4:DSI on R-Car V4H ES3.0 Sparrow Hawk board
 *
 * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
 */

/dts-v1/;
/plugin/;

#include <dt-bindings/gpio/gpio.h>

&{/} {
	display_bl: backlight {
		compatible = "pwm-backlight";
		pwms = <&mcu 0 255 0>;
	};

	reg_display: regulator-display {
		compatible = "regulator-fixed";
		regulator-name = "rpi-display";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_dsi_touch: regulator-dsi-touch {
		compatible = "regulator-fixed";
		gpio = <&mcu 1 GPIO_ACTIVE_HIGH>;
		regulator-name = "rpi-touch";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <50000>;
		enable-active-high;
	};
};

&i2c0_mux3 {
	#address-cells = <1>;
	#size-cells = <0>;

	mcu: gpio@45 {
		compatible = "raspberrypi,touchscreen-panel-regulator-v2";
		reg = <0x45>;
		gpio-controller;
		#gpio-cells = <2>;
		#pwm-cells = <3>;
	};

	touchscreen@5d {
		compatible = "goodix,gt911";
		reg = <0x5d>;
		AVDD28-supply = <&reg_dsi_touch>;
		touchscreen-size-x = <720>;
		touchscreen-size-y = <1280>;
	};
};

&dsi0 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@1 {
			reg = <1>;

Annotation

Implementation Notes