Documentation/admin-guide/media/avermedia.rst

Source file repositories/reference/linux-study-clean/Documentation/admin-guide/media/avermedia.rst

File Facts

System
Linux kernel
Corpus path
Documentation/admin-guide/media/avermedia.rst
Extension
.rst
Size
3511 bytes
Lines
95
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: documentation
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

.. SPDX-License-Identifier: GPL-2.0

======================================
Avermedia DVB-T on BT878 Release Notes
======================================

February 14th 2006

.. note::

   Several other Avermedia devices are supported. For a more
   broader and updated content about that, please check:

   https://linuxtv.org/wiki/index.php/AVerMedia

The Avermedia DVB-T
~~~~~~~~~~~~~~~~~~~

The Avermedia DVB-T is a budget PCI DVB card. It has 3 inputs:

* RF Tuner Input
* Composite Video Input (RCA Jack)
* SVIDEO Input (Mini-DIN)

The  RF  Tuner  Input  is the input to the tuner module of the
card.  The  Tuner  is  otherwise known as the "Frontend" . The
Frontend of the Avermedia DVB-T is a Microtune 7202D. A timely
post  to  the  linux-dvb  mailing  list  ascertained  that the
Microtune  7202D  is  supported  by the sp887x driver which is
found in the dvb-hw CVS module.

The  DVB-T card is based around the BT878 chip which is a very
common multimedia bridge and often found on Analogue TV cards.
There is no on-board MPEG2 decoder, which means that all MPEG2
decoding  must  be done in software, or if you have one, on an
MPEG2 hardware decoding card or chipset.


Getting the card going
~~~~~~~~~~~~~~~~~~~~~~

At  this  stage,  it  has  not  been  able  to  ascertain  the
functionality  of the remaining device nodes in respect of the
Avermedia  DVBT.  However,  full  functionality  in respect of
tuning,  receiving  and  supplying  the  MPEG2  data stream is
possible  with the currently available versions of the driver.
It  may be possible that additional functionality is available
from  the  card  (i.e.  viewing the additional analogue inputs
that  the card presents), but this has not been tested yet. If
I get around to this, I'll update the document with whatever I
find.

To  power  up  the  card,  load  the  following modules in the
following order:

* modprobe bttv (normally loaded automatically)
* modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules)

Insertion  of  these  modules  into  the  running  kernel will
activate the appropriate DVB device nodes. It is then possible
to start accessing the card with utilities such as scan, tzap,
dvbstream etc.

The frontend module sp887x.o, requires an external   firmware.
Please use  the  command "get_dvb_firmware sp887x" to download
it. Then copy it to /usr/lib/hotplug/firmware or /lib/firmware/
(depending on configuration of firmware hotplug).

Known Limitations
~~~~~~~~~~~~~~~~~

Annotation

Implementation Notes