Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml

Source file repositories/reference/linux-study-clean/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml

File Facts

System
Linux kernel
Corpus path
Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
Extension
.yaml
Size
2299 bytes
Lines
87
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/firmware/cznic,turris-omnia-mcu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: CZ.NIC's Turris Omnia MCU

maintainers:
  - Marek Behún <kabel@kernel.org>

description:
  The MCU on Turris Omnia acts as a system controller providing additional
  GPIOs, interrupts, watchdog, system power off and wakeup configuration.

properties:
  compatible:
    const: cznic,turris-omnia-mcu

  reg:
    description: MCU I2C slave address
    maxItems: 1

  interrupts:
    maxItems: 1

  interrupt-controller: true

  '#interrupt-cells':
    const: 2
    description: |
      The first cell specifies the interrupt number (0 to 63), the second cell
      specifies interrupt type (which can be one of IRQ_TYPE_EDGE_RISING,
      IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH).
      The interrupt numbers correspond sequentially to GPIO numbers, taking the
      GPIO banks into account:
        IRQ number   GPIO bank   GPIO pin within bank
           0 - 15      0           0 - 15
          16 - 47      1           0 - 31
          48 - 63      2           0 - 15
      There are several exceptions:
        IRQ number   meaning
          11           LED panel brightness changed by button press
          13           TRNG entropy ready
          14           ECDSA message signature computation done

  gpio-controller: true

  '#gpio-cells':
    const: 3
    description:
      The first cell is bank number (0, 1 or 2), the second cell is pin number
      within the bank (0 to 15 for banks 0 and 2, 0 to 31 for bank 1), and the
      third cell specifies consumer flags.

required:
  - compatible
  - reg
  - interrupts
  - interrupt-controller
  - gpio-controller

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

    i2c {
        #address-cells = <1>;

Annotation

Implementation Notes