Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml

Source file repositories/reference/linux-study-clean/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml

File Facts

System
Linux kernel
Corpus path
Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
Extension
.yaml
Size
1705 bytes
Lines
70
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/maxim,max6650.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Maxim MAX6650 and MAX6651 I2C Fan Controllers

maintainers:
  - Javier Carrasco <javier.carrasco.cruz@gmail.com>

description: |
  The MAX6650 and MAX6651 regulate and monitor the speed
  of 5VDC/12VDC burshless fans with built-in tachometers.

  Datasheets:
    https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf

properties:
  compatible:
    enum:
      - maxim,max6650
      - maxim,max6651

  reg:
    maxItems: 1

  maxim,fan-microvolt:
    description:
      The supply voltage of the fan, either 5000000 uV or
      12000000 uV.
    enum: [5000000, 12000000]

  maxim,fan-prescale:
    description:
      Pre-scaling value, as per datasheet. Lower values
      allow more fine-grained control of slower fans.
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [1, 2, 4, 8, 16]

  maxim,fan-target-rpm:
    description:
      Initial requested fan rotation speed. If specified, the
      driver selects closed-loop mode and the requested speed.
      This ensures the fan is already running before userspace
      takes over.
    $ref: /schemas/types.yaml#/definitions/uint32
    maximum: 30000

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        fan-controller@1b {
            compatible = "maxim,max6650";
            reg = <0x1b>;
            maxim,fan-microvolt = <12000000>;
            maxim,fan-prescale = <4>;
            maxim,fan-target-rpm = <1200>;
        };
    };

Annotation

Implementation Notes