Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml

Source file repositories/reference/linux-study-clean/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml

File Facts

System
Linux kernel
Corpus path
Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml
Extension
.yaml
Size
1627 bytes
Lines
71
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/nuvoton,nct7201.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Nuvoton nct7201 and similar ADCs

maintainers:
  - Eason Yang <j2anfernee@gmail.com>

description: |
  The NCT7201/NCT7202 is a Nuvoton Hardware Monitor IC, contains up to 12
  voltage monitoring channels, with SMBus interface, and up to 4 sets SMBus
  address selection by ADDR connection. It also provides ALERT# signal for
  event notification and reset input RSTIN# to recover it from a fault
  condition.

  NCT7201 contains 8 voltage monitor inputs (VIN1~VIN8).
  NCT7202 contains 12 voltage monitor inputs (VIN1~VIN12).

properties:
  compatible:
    enum:
      - nuvoton,nct7201
      - nuvoton,nct7202

  reg:
    maxItems: 1

  vdd-supply:
    description:
      A 3.3V to supply that powers the chip.

  vref-supply:
    description:
      The regulator supply for the ADC reference voltage.

  interrupts:
    maxItems: 1

  reset-gpios:
    maxItems: 1

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>

    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        adc@1d {
            compatible = "nuvoton,nct7202";
            reg = <0x1d>;
            vdd-supply = <&vdd>;
            vref-supply = <&vref>;
            interrupt-parent = <&gpio3>;
            interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
            reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
        };
    };
...

Annotation

Implementation Notes