Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml

Source file repositories/reference/linux-study-clean/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml

File Facts

System
Linux kernel
Corpus path
Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
Extension
.yaml
Size
3033 bytes
Lines
123
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ovti,ov5675.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Omnivision OV5675 CMOS Sensor

maintainers:
  - Quentin Schulz <quentin.schulz@theobroma-systems.com>

allOf:
  - $ref: /schemas/media/video-interface-devices.yaml#

description: |
  The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS
  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
  sub-sampled, and windowed 10-bit MIPI images in various formats via the
  Serial Camera Control Bus (SCCB) interface.

  This chip is programmable through I2C and two-wire SCCB. The sensor output
  is available via CSI-2 serial data output (up to 2-lane).

properties:
  compatible:
    const: ovti,ov5675

  reg:
    maxItems: 1

  clocks:
    description:
      System input clock (aka XVCLK). From 6 to 27 MHz.
    maxItems: 1

  dovdd-supply:
    description:
      Digital I/O voltage supply, 1.8 volts.

  avdd-supply:
    description:
      Analog voltage supply, 2.8 volts.

  dvdd-supply:
    description:
      Digital core voltage supply, 1.2 volts.

  reset-gpios:
    description:
      The phandle and specifier for the GPIO that controls sensor reset.
      This corresponds to the hardware pin XSHUTDN which is physically
      active low.
    maxItems: 1

  port:
    $ref: /schemas/graph.yaml#/$defs/port-base
    additionalProperties: false

    properties:
      endpoint:
        $ref: /schemas/media/video-interfaces.yaml#
        unevaluatedProperties: false

        properties:
          data-lanes:
            minItems: 1
            maxItems: 2

          # Supports max data transfer of 900 Mbps per lane

Annotation

Implementation Notes