Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml

Source file repositories/reference/linux-study-clean/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml

File Facts

System
Linux kernel
Corpus path
Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
Extension
.yaml
Size
2761 bytes
Lines
113
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/sony,imx219.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor

maintainers:
  - Dave Stevenson <dave.stevenson@raspberrypi.com>

description: |-
  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
  with an active array size of 3280H x 2464V. It is programmable through
  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
  Image data is sent through MIPI CSI-2, which is configured as either 2 or
  4 data lanes.

allOf:
  - $ref: /schemas/media/video-interface-devices.yaml#

properties:
  compatible:
    const: sony,imx219

  reg:
    description: I2C device address
    maxItems: 1

  clocks:
    maxItems: 1

  VDIG-supply:
    description:
      Digital I/O voltage supply, 1.8 volts

  VANA-supply:
    description:
      Analog voltage supply, 2.8 volts

  VDDL-supply:
    description:
      Digital core voltage supply, 1.2 volts

  reset-gpios:
    maxItems: 1
    description: |-
      Reference to the GPIO connected to the xclr pin, if any.
      Must be released (set high) after all supplies are applied.

  port:
    $ref: /schemas/graph.yaml#/$defs/port-base
    additionalProperties: false

    properties:
      endpoint:
        $ref: /schemas/media/video-interfaces.yaml#
        unevaluatedProperties: false

        properties:
          data-lanes:
            description: |-
              The sensor supports either two-lane, or four-lane operation.
              If this property is omitted four-lane operation is assumed.
              For two-lane operation the property must be set to <1 2>.
            items:
              - const: 1
              - const: 2

          clock-noncontinuous: true

Annotation

Implementation Notes