Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml

Source file repositories/reference/linux-study-clean/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml

File Facts

System
Linux kernel
Corpus path
Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
Extension
.yaml
Size
2569 bytes
Lines
107
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/nfc/ti,trf7970a.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver

maintainers:
  - Krzysztof Kozlowski <krzk@kernel.org>
  - Mark Greer <mgreer@animalcreek.com>

properties:
  compatible:
    const: ti,trf7970a

  autosuspend-delay:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: |
      Specify autosuspend delay in milliseconds.

  clock-frequency:
    description: |
      Set to specify that the input frequency to the trf7970a is 13560000Hz or
      27120000Hz

  en2-rf-quirk:
    type: boolean
    description: |
      Specify that the trf7970a being used has the "EN2 RF" erratum

  interrupts:
    maxItems: 1

  irq-status-read-quirk:
    type: boolean
    description: |
      Specify that the trf7970a being used has the "IRQ Status Read" erratum

  reg:
    maxItems: 1

  ti,enable-gpios:
    minItems: 1
    maxItems: 2
    description: |
      One or two GPIO entries used for 'EN' and 'EN2' pins on the TRF7970A. EN2
      is optional.

  vdd-io-supply:
    description: |
      Regulator specifying voltage for VDD-IO

  vin-supply:
    description: |
      Regulator for supply voltage to VIN pin

  ti,rx-gain-reduction-db:
    description: |
      Specify an RX gain reduction to reduce antenna sensitivity with 5dB per
      increment, with a maximum of 15dB.
    enum: [ 0, 5, 10, 15]

required:
  - compatible
  - interrupts
  - reg
  - spi-max-frequency
  - ti,enable-gpios
  - vin-supply

Annotation

Implementation Notes