Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml

Source file repositories/reference/linux-study-clean/Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml

File Facts

System
Linux kernel
Corpus path
Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
Extension
.yaml
Size
2178 bytes
Lines
83
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Richtek RT9467 Switching Battery Charger with Power Path Management

maintainers:
  - ChiYuan Huang <cy_huang@richtek.com>
  - ChiaEn Wu <chiaen_wu@richtek.com>

description: |
  RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
  portable applications. It integrates a synchronous PWM controller, power
  MOSFETs, input current sensing and regulation, high-accuracy voltage
  regulation, and charge termination. The charge current is regulated through
  integrated sensing resistors.

  The RT9467 also features USB On-The-Go (OTG) support. It also integrates
  D+/D- pin for USB host/charging port detection.

  Datasheet is available at
  https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf

properties:
  compatible:
    const: richtek,rt9467

  reg:
    maxItems: 1

  wakeup-source: true

  interrupts:
    maxItems: 1

  charge-enable-gpios:
    description: GPIO is used to turn on and off charging.
    maxItems: 1

  usb-otg-vbus-regulator:
    type: object
    description: OTG boost regulator.
    unevaluatedProperties: false
    $ref: /schemas/regulator/regulator.yaml#

    properties:
      enable-gpios: true

required:
  - compatible
  - reg
  - wakeup-source
  - interrupts

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/gpio/gpio.h>
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;

      charger@5b {
        compatible = "richtek,rt9467";
        reg = <0x5b>;
        wakeup-source;

Annotation

Implementation Notes