Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml

Source file repositories/reference/linux-study-clean/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml

File Facts

System
Linux kernel
Corpus path
Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
Extension
.yaml
Size
2752 bytes
Lines
84
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: configuration, schema, or hardware description
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

%YAML 1.2
---
$id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip IP corePWM controller

maintainers:
  - Conor Dooley <conor.dooley@microchip.com>

description: |
  corePWM is an 16 channel pulse width modulator FPGA IP

  https://www.microsemi.com/existing-parts/parts/152118

allOf:
  - $ref: pwm.yaml#

properties:
  compatible:
    items:
      - const: microchip,corepwm-rtl-v4

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

  "#pwm-cells":
    enum: [2, 3]
    description:
      The only flag supported by the controller is PWM_POLARITY_INVERTED.

  microchip,sync-update-mask:
    description: |
      Depending on how the IP is instantiated, there are two modes of operation.
      In synchronous mode, all channels are updated at the beginning of the PWM period,
      and in asynchronous mode updates happen as the control registers are written.
      A 16 bit wide "SHADOW_REG_EN" parameter of the IP core controls whether synchronous
      mode is possible for each channel, and is set by the bitstream programmed to the
      FPGA. If the IP core is instantiated with SHADOW_REG_ENx=1, both registers that
      control the duty cycle for channel x have a second "shadow"/buffer reg synthesised.
      At runtime a bit wide register exposed to APB can be used to toggle on/off
      synchronised mode for all channels it has been synthesised for.
      Each bit of "microchip,sync-update-mask" corresponds to a PWM channel & represents
      whether synchronous mode is possible for the PWM channel.

    $ref: /schemas/types.yaml#/definitions/uint32
    default: 0

  microchip,dac-mode-mask:
    description: |
      Optional, per-channel Low Ripple DAC mode is possible on this IP core. It creates
      a minimum period pulse train whose High/Low average is that of the chosen duty
      cycle. This "DAC" will have far better bandwidth and ripple performance than the
      standard PWM algorithm can achieve. A 16 bit DAC_MODE module parameter of the IP
      core, set at instantiation and by the bitstream programmed to the FPGA, determines
      whether a given channel operates in regular PWM or DAC mode.
      Each bit corresponds to a PWM channel & represents whether DAC mode is enabled
      for that channel.

    $ref: /schemas/types.yaml#/definitions/uint32
    default: 0

required:
  - compatible
  - reg

Annotation

Implementation Notes