Documentation/hwmon/emc2103.rst
Source file repositories/reference/linux-study-clean/Documentation/hwmon/emc2103.rst
File Facts
- System
- Linux kernel
- Corpus path
Documentation/hwmon/emc2103.rst- Extension
.rst- Size
- 1262 bytes
- Lines
- 38
- Domain
- Support Tooling And Documentation
- Bucket
- Documentation
- Inferred role
- Support Tooling And Documentation: documentation
- Status
- atlas-only
Why This File Exists
Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.
- Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.
Dependency Surface
- No C-style include directives detected by the generator.
Detected Declarations
- No top-level syscall, struct, function, initcall, or export declaration detected by the generator.
Annotated Snippet
Kernel driver emc2103
======================
Supported chips:
* SMSC EMC2103
Addresses scanned: I2C 0x2e
Prefix: 'emc2103'
Datasheet: Not public
Authors:
Steve Glendinning <steve.glendinning@smsc.com>
Description
-----------
The Standard Microsystems Corporation (SMSC) EMC2103 chips
contain up to 4 temperature sensors and a single fan controller.
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
the readings more range or accuracy. Not all RPM values can accurately be
represented, so some rounding is done. With a divider of 1, the lowest
representable value is 480 RPM.
This driver supports RPM based control, to use this a fan target
should be written to fan1_target and pwm1_enable should be set to 3.
The 2103-2 and 2103-4 variants have a third temperature sensor, which can
be connected to two anti-parallel diodes. These values can be read
as temp3 and temp4. If only one diode is attached to this channel, temp4
will show as "fault". The module parameter "apd=0" can be used to suppress
this 4th channel when anti-parallel diodes are not fitted.Annotation
- Atlas domain: Support Tooling And Documentation / Documentation.
- Implementation status: atlas-only.
Implementation Notes
- This generated page is the file-by-file coverage layer; curated subsystem chapters should link here when they synthesize a multi-file control flow.
- Core OS pages should be promoted from atlas-only to deep-reviewed when they explain data structures, invariants, locking, lifecycle, and C implementation snippets.
- Driver-family pages are intentionally pattern-oriented unless they are part of the selected PCIe/NVMe representative device path.