Documentation/hwmon/mp2856.rst

Source file repositories/reference/linux-study-clean/Documentation/hwmon/mp2856.rst

File Facts

System
Linux kernel
Corpus path
Documentation/hwmon/mp2856.rst
Extension
.rst
Size
1931 bytes
Lines
99
Domain
Support Tooling And Documentation
Bucket
Documentation
Inferred role
Support Tooling And Documentation: documentation
Status
atlas-only

Why This File Exists

Repository support layer: documentation, build tooling, samples, user-space helper tools, generated initramfs support, licenses, and validation utilities.

Dependency Surface

Detected Declarations

Annotated Snippet

.. SPDX-License-Identifier: GPL-2.0

Kernel driver mp2856
====================

Supported chips:

  * MPS MP2856

    Prefix: 'mp2856'

  * MPS MP2857

    Prefix: 'mp2857'

Author:

	Peter Yin <peter.yin@quantatw.com>

Description
-----------

This driver implements support for Monolithic Power Systems, Inc. (MPS)
vendor dual-loop, digital, multi-phase controller MP2856/MP2857

This device:

- Supports up to two power rail.
- Supports two pages 0 and 1 for and also pages 2 for configuration.
- Can configured VOUT readout in direct or VID format and allows
  setting of different formats on rails 1 and 2. For VID the following
  protocols are available: AMD SVI3 mode with 5-mV/LSB.

Device supports:

- SVID interface.
- AVSBus interface.

Device compliant with:

- PMBus rev 1.3 interface.

Device supports direct format for reading output current, output voltage,
input and output power and temperature.
Device supports linear format for reading input voltage and input power.
Device supports VID and direct formats for reading output voltage.
The below VID modes are supported: AMD SVI3.

The driver provides the following sysfs attributes for current measurements:

- indexes 1  for "iin";
- indexes 2, 3 for "iout";

**curr[1-3]_alarm**

**curr[1-3]_input**

**curr[1-3]_label**

The driver provides the following sysfs attributes for voltage measurements.

- indexes 1 for "vin";
- indexes 2, 3 for "vout";

**in[1-3]_crit**

**in[1-3]_crit_alarm**

**in[1-3]_input**

Annotation

Implementation Notes