drivers/macintosh/windfarm_mpu.h
Source file repositories/reference/linux-study-clean/drivers/macintosh/windfarm_mpu.h
File Facts
- System
- Linux kernel
- Corpus path
drivers/macintosh/windfarm_mpu.h- Extension
.h- Size
- 3828 bytes
- Lines
- 107
- Domain
- Driver Families
- Bucket
- drivers/macintosh
- Inferred role
- Driver Families: implementation source
- Status
- source implementation candidate
Why This File Exists
Repeatable hardware-adapter layer. Deep compatibility for every driver is out of scope; this atlas records patterns, probe lifecycles, bus glue, IRQ/DMA usage, and links back to core abstractions.
- Repeatable hardware-adapter layer. Deep compatibility for every driver is out of scope; this atlas records patterns, probe lifecycles, bus glue, IRQ/DMA usage, and links back to core abstractions.
- Defines or uses C structs; map object ownership, embedded links, reference counts, and lock ownership.
Dependency Surface
linux/of.h
Detected Declarations
struct mpu_data
Annotated Snippet
#ifndef __WINDFARM_MPU_H
#define __WINDFARM_MPU_H
#include <linux/of.h>
typedef unsigned short fu16;
typedef int fs32;
typedef short fs16;
/* Definition of the MPU data structure which contains per CPU
* calibration information (among others) for the G5 machines
*/
struct mpu_data
{
u8 signature; /* 0x00 - EEPROM sig. */
u8 bytes_used; /* 0x01 - Bytes used in eeprom (160 ?) */
u8 size; /* 0x02 - EEPROM size (256 ?) */
u8 version; /* 0x03 - EEPROM version */
u32 data_revision; /* 0x04 - Dataset revision */
u8 processor_bin_code[3]; /* 0x08 - Processor BIN code */
u8 bin_code_expansion; /* 0x0b - ??? (padding ?) */
u8 processor_num; /* 0x0c - Number of CPUs on this MPU */
u8 input_mul_bus_div; /* 0x0d - Clock input multiplier/bus divider */
u8 reserved1[2]; /* 0x0e - */
u32 input_clk_freq_high; /* 0x10 - Input clock frequency high */
u8 cpu_nb_target_cycles; /* 0x14 - ??? */
u8 cpu_statlat; /* 0x15 - ??? */
u8 cpu_snooplat; /* 0x16 - ??? */
u8 cpu_snoopacc; /* 0x17 - ??? */
u8 nb_paamwin; /* 0x18 - ??? */
u8 nb_statlat; /* 0x19 - ??? */
u8 nb_snooplat; /* 0x1a - ??? */
u8 nb_snoopwin; /* 0x1b - ??? */
u8 api_bus_mode; /* 0x1c - ??? */
u8 reserved2[3]; /* 0x1d - */
u32 input_clk_freq_low; /* 0x20 - Input clock frequency low */
u8 processor_card_slot; /* 0x24 - Processor card slot number */
u8 reserved3[2]; /* 0x25 - */
u8 padjmax; /* 0x27 - Max power adjustment (Not in OF!) */
u8 ttarget; /* 0x28 - Target temperature */
u8 tmax; /* 0x29 - Max temperature */
u8 pmaxh; /* 0x2a - Max power */
u8 tguardband; /* 0x2b - Guardband temp ??? Hist. len in OSX */
fs32 pid_gp; /* 0x2c - PID proportional gain */
fs32 pid_gr; /* 0x30 - PID reset gain */
fs32 pid_gd; /* 0x34 - PID derivative gain */
fu16 voph; /* 0x38 - Vop High */
fu16 vopl; /* 0x3a - Vop Low */
fs16 nactual_die; /* 0x3c - nActual Die */
fs16 nactual_heatsink; /* 0x3e - nActual Heatsink */
fs16 nactual_system; /* 0x40 - nActual System */
u16 calibration_flags; /* 0x42 - Calibration flags */
fu16 mdiode; /* 0x44 - Diode M value (scaling factor) */
fs16 bdiode; /* 0x46 - Diode B value (offset) */
fs32 theta_heat_sink; /* 0x48 - Theta heat sink */
u16 rminn_intake_fan; /* 0x4c - Intake fan min RPM */
u16 rmaxn_intake_fan; /* 0x4e - Intake fan max RPM */
u16 rminn_exhaust_fan; /* 0x50 - Exhaust fan min RPM */
u16 rmaxn_exhaust_fan; /* 0x52 - Exhaust fan max RPM */
u8 processor_part_num[8]; /* 0x54 - Processor part number XX pumps min/max */
u32 processor_lot_num; /* 0x5c - Processor lot number */
u8 orig_card_sernum[0x10]; /* 0x60 - Card original serial number */
u8 curr_card_sernum[0x10]; /* 0x70 - Card current serial number */
u8 mlb_sernum[0x18]; /* 0x80 - MLB serial number */
u32 checksum1; /* 0x98 - */
u32 checksum2; /* 0x9c - */
}; /* Total size = 0xa0 */
static inline const struct mpu_data *wf_get_mpu(int cpu)
{
struct device_node *np;
char nodename[64];
const void *data;
int len;
/*
* prom.c routine for finding a node by path is a bit brain dead
* and requires exact @xxx unit numbers. This is a bit ugly but
* will work for these machines
*/
sprintf(nodename, "/u3@0,f8000000/i2c@f8001000/cpuid@a%d", cpu ? 2 : 0);
np = of_find_node_by_path(nodename);
if (!np)
return NULL;
data = of_get_property(np, "cpuid", &len);
of_node_put(np);
if (!data)
return NULL;
/*
Annotation
- Immediate include surface: `linux/of.h`.
- Detected declarations: `struct mpu_data`.
- Atlas domain: Driver Families / drivers/macintosh.
- Implementation status: source implementation candidate.
Implementation Notes
- This generated page is the file-by-file coverage layer; curated subsystem chapters should link here when they synthesize a multi-file control flow.
- Core OS pages should be promoted from atlas-only to deep-reviewed when they explain data structures, invariants, locking, lifecycle, and C implementation snippets.
- Driver-family pages are intentionally pattern-oriented unless they are part of the selected PCIe/NVMe representative device path.