drivers/net/wireless/ath/ath11k/mac.h

Source file repositories/reference/linux-study-clean/drivers/net/wireless/ath/ath11k/mac.h

File Facts

System
Linux kernel
Corpus path
drivers/net/wireless/ath/ath11k/mac.h
Extension
.h
Size
6983 bytes
Lines
185
Domain
Driver Families
Bucket
drivers/net
Inferred role
Driver Families: implementation source
Status
source implementation candidate

Why This File Exists

Repeatable hardware-adapter layer. Deep compatibility for every driver is out of scope; this atlas records patterns, probe lifecycles, bus glue, IRQ/DMA usage, and links back to core abstractions.

Dependency Surface

Detected Declarations

Annotated Snippet

struct ath11k_generic_iter {
	struct ath11k *ar;
	int ret;
};

/* number of failed packets (20 packets with 16 sw reties each) */
#define ATH11K_KICKOUT_THRESHOLD		(20 * 16)

/* Use insanely high numbers to make sure that the firmware implementation
 * won't start, we have the same functionality already in hostapd. Unit
 * is seconds.
 */
#define ATH11K_KEEPALIVE_MIN_IDLE		3747
#define ATH11K_KEEPALIVE_MAX_IDLE		3895
#define ATH11K_KEEPALIVE_MAX_UNRESPONSIVE	3900

#define WMI_HOST_RC_DS_FLAG			0x01
#define WMI_HOST_RC_CW40_FLAG			0x02
#define WMI_HOST_RC_SGI_FLAG			0x04
#define WMI_HOST_RC_HT_FLAG			0x08
#define WMI_HOST_RC_RTSCTS_FLAG			0x10
#define WMI_HOST_RC_TX_STBC_FLAG		0x20
#define WMI_HOST_RC_RX_STBC_FLAG		0xC0
#define WMI_HOST_RC_RX_STBC_FLAG_S		6
#define WMI_HOST_RC_WEP_TKIP_FLAG		0x100
#define WMI_HOST_RC_TS_FLAG			0x200
#define WMI_HOST_RC_UAPSD_FLAG			0x400

#define WMI_HT_CAP_ENABLED			0x0001
#define WMI_HT_CAP_HT20_SGI			0x0002
#define WMI_HT_CAP_DYNAMIC_SMPS			0x0004
#define WMI_HT_CAP_TX_STBC			0x0008
#define WMI_HT_CAP_TX_STBC_MASK_SHIFT		3
#define WMI_HT_CAP_RX_STBC			0x0030
#define WMI_HT_CAP_RX_STBC_MASK_SHIFT		4
#define WMI_HT_CAP_LDPC				0x0040
#define WMI_HT_CAP_L_SIG_TXOP_PROT		0x0080
#define WMI_HT_CAP_MPDU_DENSITY			0x0700
#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT	8
#define WMI_HT_CAP_HT40_SGI			0x0800
#define WMI_HT_CAP_RX_LDPC			0x1000
#define WMI_HT_CAP_TX_LDPC			0x2000
#define WMI_HT_CAP_IBF_BFER			0x4000

/* These macros should be used when we wish to advertise STBC support for
 * only 1SS or 2SS or 3SS.
 */
#define WMI_HT_CAP_RX_STBC_1SS			0x0010
#define WMI_HT_CAP_RX_STBC_2SS			0x0020
#define WMI_HT_CAP_RX_STBC_3SS			0x0030

#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED    | \
				WMI_HT_CAP_HT20_SGI   | \
				WMI_HT_CAP_HT40_SGI   | \
				WMI_HT_CAP_TX_STBC    | \
				WMI_HT_CAP_RX_STBC    | \
				WMI_HT_CAP_LDPC)

#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK		0x00000003
#define WMI_VHT_CAP_RX_LDPC			0x00000010
#define WMI_VHT_CAP_SGI_80MHZ			0x00000020
#define WMI_VHT_CAP_SGI_160MHZ			0x00000040
#define WMI_VHT_CAP_TX_STBC			0x00000080
#define WMI_VHT_CAP_RX_STBC_MASK		0x00000300
#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT		8
#define WMI_VHT_CAP_SU_BFER			0x00000800
#define WMI_VHT_CAP_SU_BFEE			0x00001000
#define WMI_VHT_CAP_MAX_CS_ANT_MASK		0x0000E000
#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT	13
#define WMI_VHT_CAP_MAX_SND_DIM_MASK		0x00070000
#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT	16
#define WMI_VHT_CAP_MU_BFER			0x00080000
#define WMI_VHT_CAP_MU_BFEE			0x00100000
#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP		0x03800000
#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT	23
#define WMI_VHT_CAP_RX_FIXED_ANT		0x10000000
#define WMI_VHT_CAP_TX_FIXED_ANT		0x20000000

#define WMI_VHT_CAP_MAX_MPDU_LEN_11454		0x00000002

/* These macros should be used when we wish to advertise STBC support for
 * only 1SS or 2SS or 3SS.
 */
#define WMI_VHT_CAP_RX_STBC_1SS			0x00000100
#define WMI_VHT_CAP_RX_STBC_2SS			0x00000200
#define WMI_VHT_CAP_RX_STBC_3SS			0x00000300

#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
				 WMI_VHT_CAP_SGI_80MHZ      |       \
				 WMI_VHT_CAP_TX_STBC        |       \

Annotation

Implementation Notes